Ask Experts Questions for FREE Help !
Ask
    sanderson1's Avatar
    sanderson1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 20, 2010, 12:34 PM
    Allowable ground size on 80 amp circuit
    Running 70 amp circuit breaker on #4 THHN stranded feeding a 3 phase 20hp motor. Motor FLA is 54, NFPA says 59, can I run a #6 ground?

Check out some similar questions!

Correct method to RUN copper ground wire to ground a 200 amp electrical circuit box? [ 0 Answers ]

Is a 3-wire copper ground or a solid copper wire required to ground a 200 amp electrical box? Is this wireing correct: A 3-wire copper ground wire in a conduit run from the electrical panel to the copper rod in the ground then to the cold water; AND THEN IN THE GARAGE the naked 3-wire...

Allowable amount of receptacles per 20A circuit [ 2 Answers ]

I am getting ready to do the rough in on a renovation project and wanted to check the allowable amount of receptacles for a 20 amp breaker using #12awg wire. Our electrician will close but I needed an allowable amount of receptacles per 20A circuit. Any help is appreciated. Arjay808.

The ground for a 30 amp circuit [ 2 Answers ]

I have a travel trailer 30 amp electrical cord. I am wiring a new male end on it. I have a white, green and black wire. Which is the ground? Thanks

Wire size for 100 amp 3 phase circuit [ 1 Answers ]

I am installing a commercial convection oven rated as follows: 220V 3 Phase. The oven pulls 23 kilowatts. I calculate this to be about 64 maximum amps. So, I'll use a dual pole GE 100 amp breaker in my box. The wire run will be about 15 feet through conduit. I'm getting conflicting reports on...

100 amp box ground size [ 1 Answers ]

What ground size wire do I need for a 100 amp box?

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.