Amp rating for 4 awg aluminum 600v

bhenaman1 Posts: 1, Reputation: 1

New Member

Nov 30, 2009, 09:18 AM

Amp rating for 4 awg aluminum 600v

I am trying to find the max amp load for #4 AWG Aluminum 600v cable

ballengerb1 Posts: 27,378, Reputation: 2280

Home Repair & Remodeling Expert

Nov 30, 2009, 09:46 AM

You might find it helpful to bookmark this page. Wire sizes, gauges, for breakers

Add your answer here.

Check out some similar questions!

#12 AWG copper wire for baseboard heaters [ 18 Answers ]

I want to run a circuit for baseboard heaters and have been told to use #12 AWG copper. I have a total of three heaters in separate rooms each controlled by its own thermostat. I would like to use #14 AWG copper and have calculated the voltage drop with #14 to be less than 1% with all three heaters...

Using 20 amp plug on 15 amp outlet [ 1 Answers ]

I am buying a dry sauna that has a 20-amp plug. The outlet in my home says 15A. The breaker for this outlet says 20. Can I use this dry sauna on this outlet. Do I need to change the outlet. Is breaker adequate if I do this? Dry sauna brochure says: 120 volt / 1531 watt/ 12.75 amp....

Where to Buy Rod & Key to Turn On & Off Old Gas Floor Heater [ 0 Answers ]

Where do I purchase a rod and key to turn on and off an old gas floor heater?

Overvoltage 600V [ 2 Answers ]

I have a 150 KVA generator, around 10 days ago, it suddenly started giving an output of 600 V, the electrician who came told me that the heat sink and the photo transistor were burned out, and he replaced them. To be honest they cost quite a load of money. Still the generator is not functioning,...

Electrical outlet rating vs. Circuit breaker amperage rating [ 5 Answers ]

Hello to all, I am new to this forum, please excuse me if this question has been answered. I just bought a Thermal Dynamics Plasma cutter. It has a Nema 50-P plug end on it, which I assume is to be plugged into a Nema 50-R outlet. In looking in my reference book, this is a 3 wire...