Ask Experts Questions for FREE Help !
Ask
    Joewat's Avatar
    Joewat Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 8, 2016, 10:26 AM
    3 phase 3 wire 240v old system all 3 phases to ground
    I had to put a 5 jaw meter securely back on pole it's a 3phase 3 wire 240v no ground from transformer. So Pg&e shut of power I secured box and tested from ground to all 3 phases and got continuity. How and why is this possible did something get damaged in the transformer? When energized will it put power in all of my panels. Please help no one has even come close to helping me
    hfcarson's Avatar
    hfcarson Posts: 1,004, Reputation: 49
    Ultra Member
     
    #2

    Dec 9, 2016, 09:42 AM
    how did you measure continuity?

    where are you?
    are you a licensed electrician?
    are you sure this is 240V 3-phase? That is very unusual...
    Are there transformers on the pole? How many?
    hfcarson's Avatar
    hfcarson Posts: 1,004, Reputation: 49
    Ultra Member
     
    #3

    Dec 12, 2016, 06:11 AM
    So...did it explode?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

1 phase, 3 wire, 120/240V [ 3 Answers ]

I am trying to answer a question on electric application for a 30 x 40 garage with baseboard heat and about 15 120 v outlets run are compressor nothing huge, led lighting garage doors . Choices 1 phase 3 wire 120/240v 1 phase 3 wire Y 120/208v 3 phase 4 wire y 120/208v 3 phase 4 wire y...

Running a 240v 2 wire line next to a branch circuit ground? [ 4 Answers ]

I have a branch circuit that is reading open ground due to it being an old house and no ground was pulled to that circuit. I have to pull a 240v 2 wire (2 hot & 1 ground) to that general location and was wondering if it would be safe to pull in an extra ground wire next to the 240v line to ground...

What size wire do I need to run a 5 hp, 240V, 1 phase motor (28FLA) 2600'? [ 1 Answers ]

I need to know what size wire is required to run 2600' length and operate a 5hp, 240/1/60 (28FLA) motor? Thanks

Wiring my hot tub neutral and ground in a 4 wire 240v situation [ 1 Answers ]

Can I run a neutral wire from my main panel bar which has both neutral (white) and bare grounds on it to 1 of 2 bars in a spa pack box containing a 50 amp gfci and 2 separate ground/neutral bars without this causing a fault and tripping my gfci? The 2nd bar in the pack I plan to use a equipment...


View more questions Search