 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
The inner spool that sticks out about an inch will unscrew. You must hold the outer housing while doing this. Some weed eaters have a small hole just above the housing. You can stick a nail into the hole and it will lock the shaft from turning. Once the spool comes out you can put in a new spool or coil just replacement string. Take a scap of the old string with you to the store because the stuff comes in about 10 sizes.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a WeedEater Featherlite Plus trimmer. I have had it for about three years. It has worked wonderfully well, until the last time I used it, and even then it ran. My problem is that the last time I cranked it, the rope did not retrieve, or get pulled back in to where it is supposed to be. ...
I need step by step help on re-installing a (recoil) starter rope on a weed eater. If by chance you have diagram of how to put it on , I sure would appreciate it , any info will be appreciated ty denise
It is a 26.2cc Model 358.798130 Serial D3563021 I replaced the fuel line, it is a one (1) fuel line feed to carburater. It ran for aminute or so. Is there a print on this model I can get. Sears wants about 85 dollars to fix. I can buy another one for less than a 100 dollars, and Harbor frieght...
How to wind a double line weed eater
I have a Weed Eater Featherlite. I bought one of those replacement heads for it. How do I get the old head completely off?
View more questions Search
|
