| 
 
 
  Not your question?
  Ask your question
  View similar questions
   
 Add your answer here.Check out some similar questions!
Interior wall removal
 [ 15 Answers ]
 OK guys I have removed the drywall and studs from the interior wall and what I thought was a framed soffit turns out to be 2 2x12's with plywood between them. The beam goes all the way across the living room width just like the center beam of my cathedral ceiling. I have pictures looking up the air... 
Removing 6' of 11' 6" interior wall
 [ 0 Answers ]
 I have a 11'6" interior wall separating the dining room from the entrance hallway. I want to remove 6' of it to open the space up. I will only have to move one electrical line for the light switch to the dining room ceiling light which is no problem since it will be made shorter. I am posting pics... 
What material can I use on an interior basement wall?
 [ 3 Answers ]
 I have a 50+ home, and half of a finished basement. The foundation was poured using floor board back then, so there's horizontal lines in the walls. (During the depression I am told) Some aren't too bad, some are very noticeable. To save money we originally sponged painted over them to hide the... 
Interior shower wall
 [ 2 Answers ]
 I just finished insulating an interior shower wall and will start cutting the hardi backerboard to go over it. Do I have to put up a vapor barrier or can I just red guard it before installing the 12x12 porcelain tiles? Also is Versabond fortified thinset mortar the correct mortar to use? I will be... 
Removing an interior wall
 [ 3 Answers ]
 I am Renovating my kitchen and am removing the wall between the kitchen and dining room. The roof is constructed with W trusses that span the entire house. The wall rests beneath the middle of the trusses, but only halfway along from an exterior wall. After searching on-line for a while I have... View more questions Search 
 |