Not your question?
  Ask your question
  View similar questions
   
  
 Add your answer here.Check out some similar questions!
Installing a floating floor over existing parquet floor
 [ 4 Answers ]
 I live in a condo and currently have 8" square oak parquet floors. The parquet is half an inch thick and glued down to the concrete subfloor (it is glued with a think black substance that I was told is tar). The flooring has been in the building for nearly 50 years and seems to be well intact... 
Converting a tile floor to a stained concrete floor
 [ 2 Answers ]
 I am thinking about taking up the tile in my kitchen and staining the concrete underneath it, but I don't know if it will be possible to get up all the stains left on the concrete from the tile. I do not want to take up the tile if there is too much of a possibility that the tile stains won't come... 
Squeaky floor
 [ 3 Answers ]
 How can I stop a kitchen floor from squeaking? We have the carpet up, so can work on the subfloor. 
Proper underlayment for vinyl floor starting at floor joists
 [ 2 Answers ]
 What is the proper way to build up a floor to prepare for vinyl flooring? I'm building a mud-room in the garage attached to the house, 5' by 13' . Presently I have the joists installed and am ready for subfloor. I am planning to use 3/4" T&G UDL plywood, glued to joists with construction... 
Real bad squeaky floor
 [ 3 Answers ]
 
Hello all, I bought this house few months a ago. This home is almost 11 years old so there are no squeaks through out the flooring except on the second floor between the dividing wall of two bedrooms. What I have noticed is that the floor squeaks close to the dividing wall on both sides. The... View more questions Search 
  |