Ask Experts Questions for FREE Help !
Ask
    svtford03's Avatar
    svtford03 Posts: 1, Reputation: 1
    New Member
     
    #1

    May 29, 2010, 02:54 PM
    Leaning posts on above ground pool
    Had flood month ago and since three vertical posts on above ground oval pool are leaning out at bottom. How do I get them back in place and secured so they won't move?
    jmjoseph's Avatar
    jmjoseph Posts: 2,727, Reputation: 1244
    Ultra Member
     
    #2

    May 29, 2010, 03:36 PM

    Can you post a picture?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Leveling the ground with mulch for above ground pool [ 3 Answers ]

I was wondering if I could use mulch to level the ground for my above ground pool. I was told not to use sand, and I have a hard time digging.

Ground setup for above ground pool [ 1 Answers ]

Do I go out further than pool size and how much do I dig out and how much sand do I use it's a 24 ft pool

Above ground pool put in the ground [ 1 Answers ]

I'm installing an above ground pool into the ground. I need some step by step instructions on how to install the liner and make sure the pool is good and round before I start filling it with water. Will the roundness take better shape when I fill it?:rolleyes:

Water behind a pool liner of an above ground pool [ 1 Answers ]

Hello, the liner in part of my pool is below the water level and thus water is now behind the liner. I cannot pick up the liner because it is so heavy with the weight of the water. 1. Is this hurting my pool 2. How much to replace a new liner and have it installed for a 16ft round pool ...

Install New Pool Liner-Above Ground Pool [ 1 Answers ]

We are going to install a new liner in an above ground pool this weekend. I have read conflicting information as to when the skimmer and jet holes should be cut. Do you fill the pool with water within a foot of the skimmer, attach the trim kit and then cut out the liner? I don't know what to do,...


View more questions Search