Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Re roof EPDM
[ 0 Answers ]
Hello been here a long time ago... 21boat... Refresh, Im a G.C. have physically done a lot of EPDM but I have a roof question. I have a landlord that I do a lot of work for so here’s the scenario. Some cap screws under old EPDM are working there way up and some have punctured the Existing EPDM,...
Pitched shingle roofing installed over vented nailboard meeting flat EPDM roofing
[ 0 Answers ]
How do I flash and finish a pitched shingle roof installed over a 4-1/2" vented nailboard when the pitched roof dead ends into a flat EPDM roof?
EPDM Roof Plans
[ 1 Answers ]
We're just about done with the design phase of an addition to our 1933 DC row house. I plan to do most of the work myself and would like to be able to do the roof too. The addition has a modest footprint of 5'x10' and requires a roof with a 2:12 pitch or less. Our architect has called for asphalt...
IB Roofing (pvc) vs. CertianTeed Roofing
[ 3 Answers ]
Can anyone tell me the pros and cons between these two roofing materials. I am in charge of having a roof replaced for our city council. We have had several contractors come in and give us estimates and its down between these two. Both are at the same cost. This is going on a building with a flat... View more questions Search
|