Ask Experts Questions for FREE Help !
Ask
    candaceE's Avatar
    candaceE Posts: 23, Reputation: 1
    New Member
    		  
    #1

    May 9, 2012, 05:42 PM
    need diagram for 4/12 pitch stick built truss for 12x16 shed?
    I need a ROOF!!
    But I need a DIAGRAM!
    I have read and read all the do it yourself sites,not sinking in,
    I have built a 12x16 shed!! It has NO roof yet,Iam stuck.
    This is a list of materials Building Centre gave me and assures me is all I need to complete roof trusses with a 4/12 pitch and a one foot overhang .
    12-2x4x12-peaks??
    10-2x6x14-runs??
    4-2x6x16-??

    and of course the sheeting.
    does anybody have or could send me a diagram with measurements and all .
    please the weather looks to be rainy over the next couple weeks.
    Thanks Candace

Check out some similar questions!

Where do you find the spacing on truss diagram? [ 5 Answers ]

I have this truss diagram and I can't find anyone that can tell me what the spacing it was constructed for. The outfit that sold us the truss can't tell us. I ordered for 6 foot o/c spacing but want to know where it says this on the truss. I see a small 6 to the left of the diagram. The writing...

I want to build a pitch roof not with a truss design [ 3 Answers ]

Hi I am in the process of building an extension with no ceiling . I want a pitched roof but with no ceiling rafters at plate level to give maximum ceiling height. I believe I can use a warm roof design can anyone advise. Thank you

Built-in memory stick adapter will not work. [ 1 Answers ]

Every time I use it it freezes and comes up with: F:\ is not accessible. The request could not be performed because of an I/O device error. When I put in mem card, it recognizes it, and computer can recognize it also, as you can geuss.? Ack.

Diff. Between stick built/mobile home hot water heaters [ 3 Answers ]

I keep hearing that you should not use a hot water heater meant for a stick built house in a mobile home.why is this?thanks for any answers-whoever answers... :confused:

Convert Truss Roof over garage into 'Stick' to use space [ 3 Answers ]

I have a garage with a truss roof (pre-built trusses) and I want to use the space by converting the trusses into 'stick' built. Is this possible? Where could I get info on supporting the roof with Headers to enlarge the space?

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.