I am looking to replace old metal underground fittings and valves supplying water to my house. The main supply line to the house after the water meter is 1" metal, which branches off with four 1" x 1" x 3/4" T's. I attempted to find a manifold to replace all of the fittings but no luck, so I...

I just installed a shutoff valve for a garage bath sink and I used primer and cpvc glue on the pipe (but not the inside of angle valve). Now after drying 3 hours, its leaking at the cpvc. Is there any way to fix/glue the leak without cutting off the shutoff and going back to store to get a new one...

We are removing to popcorn from to ceiling and found that no insulation was ever add. We have two skylights windows and recest lighting also in this ceiling. We stopped everything until we can find out which way to go. What is the best wayto to this. What other information do you need from me....

Presently there are three layers of aluminum with air spaces. Can I put bats directly over this insulation and what do I have to be concerned about.

ortmanprop Newbie Join Date: Sep 2005 Posts: 0 Using CPVC -------------------------------------------------------------------------------- HI,