Ask Experts Questions for FREE Help !
    j n j tile's Avatar
    j n j tile Posts: 1, Reputation: 1
    New Member

    Jan 2, 2007, 05:38 PM
    Concrete slope
    I am setting tile on an outside patio that is on the second level of the house. The patio is a concrete slab that is completely level. I need to know what kind of concrete to use and how to go about diverting all the water so that it will drain properly
    createascape's Avatar
    createascape Posts: 1, Reputation: 1
    New Member

    Feb 9, 2011, 07:05 AM
    Slope between 1 in 60 cm to 1 in 100 cm is ideal depending if tiles are rough or smooth bed on a mix or 5-1 sand cement for less than 1" tiles or for indian stone a more robust mis using crushed stone (dust) 3 parts, 2 sand,1 part cement and add some plasterciser it will make a better smoother mix

    From create-a-scape landscapers pembrokeshire

Not your question? Ask your question View similar questions


Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.

Check out some similar questions!

Drain Slope [ 18 Answers ]

I've heard 1/4" per foot and I've also heard 1/8" per foot is acceptable for waste lines. What is the ideal slope? Does it depend on pipe size or fixture type? (i.e. toilet vs sink) Thanks!

No slope toward floor drain. [ 3 Answers ]

The crew that did my concrete also forgot to slope the floor toward the drain, then they cut lines in the floor and sawed right through the drain opening. Any suggestions.

Slope and intercept this is it for now . [ 2 Answers ]

1. Which line is the flattest (or is less steep)? Why? y = 5x -6 y = 5x + 6 y = x - 3 y = x + 3 2. The line y = 4x - 7 crosses the y axis at: (4, 0) (0, 4)

The slope [ 2 Answers ]

What is the slope of the line parallel to -2x-y=6?

Undefined slope [ 2 Answers ]

If a line has an undefined slope, what can you say about the horizontal coordinates of each of the points on the line?

View more questions Search