 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Carport Awning support
I have a 18' long by 8' wide aluminum carport awning that is attached at one end to the garage fascia with wood lag bolts and the other end is supported by two 2-1/2'' metal poles that are bolted to the concrete. These supports are not straight they have an "s" bend in them which allows a wider opening between the supports for vehicles to park towards the bottom. To make the entrance under the carport wider... so that the supports don't get hit by my truck... I removed one of the supports and fabricated a support arm which attaches to the header of my house. Now I want to move the other support leg out approx. 24''... I want to fabricate a cantilever support using a 4'' x 4'' steel column with some sort of arm so that I can attach it to the main support for the carport there fore giving me an unrestricted opening.
Can anyone give me some design recommendations for this... would appreciate it.. Thank You!! :) |
||||
Check out some similar questions!
I have a intel p-3,ram 128mb,hd of 60gb(maxtor diamond) After scanning by kespersky for 8hr,after that when irestart my comp. can't find the os, so I boot again with xp ,but it show a mesg. That "the harddisk may be destroyed or may besome problem occure"like this. Please suggest me
I live in Northern California, I pay family support to my ex but is it the same than spouse+child support? How can I stop paying alimony to my ex who's getting married?
Has anyone successfully disassembled a two car metal carport and moved it? In what steps and order did you take it apart?
Good day, I'm building an attached carport at my friend's house. There are four posts and a beam for one side, and an attached ledger board as the other support. This is to be attached to the side of the house. My question: Should the siding (which is about 1/2" thick plywood) be cut out...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
