Start > run > calc > view standard

mandeep2012 Posts: 2, Reputation: 1

New Member

Jan 16, 2011, 05:49 PM

Start > run > calc > view standard

START > RUN > CALC > VIEW STANDARD
Enter the number 4 > take the Square root of 4 > subtract 2 … the result is not zero why is it so??

Check out some similar questions!

Standard Deviation results differ when calc in excel and Microsoft works spreadsheet [ 3 Answers ]

when calculating std deviation in Microsoft Works Spreadsheet 8.5 - STD(data set range) gives a different value for my set of data, than when calculated in windows Excel - STDEV(data set range). why is this? Am I doing something wrong?

My jeep turns over but won't start. It will run when I put starting fluid but won't run [ 2 Answers ]

My Jeep will will turn over but won't start. I changed the "O" ring in the injectors cause I heard that might be a problem, still nothing. It will start when I spray starting fluid but will only run until it burns through the fluid.

Start->Run [ 3 Answers ]

I fixed my brother's computer a while back using a command that I cannot remember. His computer was constantly coming up with "Limited or no connectivity" and no matter how many different NIC's I used (wired or wireless) I couldn't get an IP from my router. Eventually I tracked down a little...

No start no run [ 5 Answers ]

I have a 1979 F150 that I have recently replaced the motor and trans everything under the hood is new. Last week I started to work and the truck died, would not restart no click nothing, the battery is new the starter is new, everything from the switch to the starter is new. My question is when you...

View more questions Search

Check out some similar questions!

Add your answer here.