Ask Experts Questions for FREE Help !
Ask
    tivovic1213's Avatar
    tivovic1213 Posts: 2, Reputation: 1
    New Member
     
    #1

    May 22, 2008, 09:34 AM
    How do I reboot a gateway that has windows xp on it
    tivovic1213's Avatar
    tivovic1213 Posts: 2, Reputation: 1
    New Member
     
    #2

    May 22, 2008, 09:37 AM
    Quote Originally Posted by ScottGem
    A Reboot simply means powering off and back on. It will not do anything to get rid of malware. I think you are thinking of a Recovery. This is using the Recovery CD or partition that was supplied with your system to restore the system to the way it came from the factory. This will wipe out anything installed to or saved on the PC since.

    How to do that is different for each brand and model. Check your manual for specifics.
    What if I don't have the cd
    ScottGem's Avatar
    ScottGem Posts: 64,966, Reputation: 6056
    Computer Expert and Renaissance Man
     
    #3

    May 22, 2008, 09:48 AM
    First its not a good idea to piggyback your question on someone else's. This can lead to confusion. You should start a new thread. So I've moved your question to its own thread.

    You need to get one from Gateway or look for a System Partition. When you boot up there should be some instructions like press F2 for Setup, F10 for Recovery etc. If so, press the appropriate key and follow instructions.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Why won't my infloor heating system circulate through the system? [ 3 Answers ]

I am having infloor heating circulation problems, My pump is running and the water at the pump is hot but it is not running through the rest of the piping. What would cause the water not to circulate?

Transferring Brinks Alarm System to Non-Monitored System [ 5 Answers ]

I understand that when you cancel your Brinks-monitored security system that they come and remove their equipment (which you apparently don't own) or you can buy all their equipment for $500. The equipment removal exposes unpainted walls and previously-covered holes. Is it possible to install a...

System calling for heat but no response from system [ 1 Answers ]

My thermostat is set to 25 which is higher than the current temperature but my heating system is not firing up.. we have hot water - the boiler is a Micron - the heating timer is set to "on" on the program setting, and so is hot water which is fine but we have no heating, it was on earlier and went...

Smoke extract system & staircase press. System [ 2 Answers ]

I am working for a 35 storey tower. There are smoke extract and staircase/lift lobby pressurisation system in case of fire. Now consultant has already given the CFM required for these Fans, but I have to submit the calculations for the same to the Local Govt. authority. So please help me if...

How do I increase H2O pressure on well system with a water filtration system? [ 2 Answers ]

Howdy, I would like to know how I can increase my water pressure. My current system uses a well pump with a small pressure tank, and "D" control valve. It then runs through a WATERSOFT filtration tank, RAINSOFT water softner, and on the Hot water side, an AQUASTAR on demand hot water system. I...


View more questions Search