Ask Experts Questions for FREE Help !
Ask
    mitchsc's Avatar
    mitchsc Posts: 802, Reputation: 7
    Senior Member
     
    #1

    Jun 21, 2009, 04:10 PM
    Power Supply Fan Not Running
    This may be a really basic question, but I can't seem to find an answer with an online search.

    RE: Dell Dimension 8100 Desktop with proprietary power supply (I think the pwr supply P/N is 3E466 but not sure)

    My wife got an error message right after boot up that said "Fan System Not Detected".

    I checked it out and no more error messages, BUT... I noticed the power supply fan is not running when cold. (I didn't run the PC very long for fear of overheating the power supply).

    I believe I heard the fan speed is variable depending on temperature.?

    2 Questions please:

    1) Is it normal for the power supply fan to be completely off when cold?

    2) What does the error message mean above?

    Thanks...
    mitchsc's Avatar
    mitchsc Posts: 802, Reputation: 7
    Senior Member
     
    #2

    Jun 21, 2009, 04:19 PM

    SORRY. My mistake.

    It's the CPU fan that is not running.

    Same questions apply.

    Thank you...
    JBeaucaire's Avatar
    JBeaucaire Posts: 5,426, Reputation: 997
    Software Expert
     
    #3

    Jun 21, 2009, 05:14 PM

    1) You can test if the fan is faulty (or the MOBO) by trying it in another computer, if you wish, but perhaps a waste of time. It would be interesting to know.

    2) Buy a replacement fan LOCALLY if possible and swap it out. If it works normally, it's a cheap and quick win. However, if it doesn't fire up, you want to be able to return it and swap it for...

    3)... a replacement fan that bypasses the MOBO and has an adapter that can plug into a power source right off the power supply. You may lose some of the cool utilities that tell you how the fan is doing, but these replacement power-supply fans are typically more rugged anyway, so it's not really that big a loss.
    mitchsc's Avatar
    mitchsc Posts: 802, Reputation: 7
    Senior Member
     
    #4

    Jun 21, 2009, 05:28 PM

    Good to know. Thanks.

    Just found problem. Stupid really.

    Loose pins on motherboard connector. Tightened with needle nose. Problem solved.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Power supply [ 5 Answers ]

What is the benefit of 220 volt supply over 110 volt or 440 volt?

Supply line won't stop running. Main water supply off [ 3 Answers ]

I was doing some bathroom remodeling and attempted to remove an old supply valve. It would not budge so I decided to cut the copper tubing underneath it and put on a new shutoff valve with a compression fitting. The problem is that water just kept coming out of that supply line. The main water...

Power supply [ 4 Answers ]

I had a power failure yester afternoon at my home. When I went home to check the computer, the light on the front was blinking and system would not power up. The computer was completely off yesterday. Could the problem be the power supply? Sal

Power supply [ 6 Answers ]

Hi, I want to know how to power up a Automation Direct power supply (STP-PWR-3204). Currently, I have connected the 120V AC pins G,N,L to various connections to a 10-circuit terminal block which in turn in wired to other components such as stepper drivers, etc. But to power up everything, I...

Running power to garage and continuing the power to a cabin later. [ 4 Answers ]

I'm building a garage this year and a cabin in the following years and I need to run power to the garage before building it. The service is about 60 feet away from the main breaker location and when I build the cabin, I would like to be able to continue the power from the garage to the cabin (120...


View more questions Search