Ask Experts Questions for FREE Help !
Ask
    MYCOMPUTER's Avatar
    MYCOMPUTER Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 24, 2008, 04:06 PM
    PC Entering Power Saving Mode
    My computer (HP Pavilion a450n) will not turn on. The monitor will momentarily display the following message, (Warning PC Entering Power Saving Mode) but otherwise is blank. I have attempted to unplug and replug every which way in different outlets, but it is useless. My computer simply will not turn on. It ran fine until I unplugged it to move it, since then I cannot get it to turn back on. Please help!
    CaptainRich's Avatar
    CaptainRich Posts: 4,492, Reputation: 537
    Cars & Trucks Expert
    		  
    #2

    Mar 24, 2008, 04:58 PM
    Quote Originally Posted by MYCOMPUTER
    My computer (HP Pavilion a450n) will not turn on. The monitor will momentarily display the following message, (Warning PC Entering Power Saving Mode) but otherwise is blank. I have attempted to unplug and replug every which way in different outlets, but it is useless. My computer simply will not turn on. It ran fine until I unplugged it to move it, since then I cannot get it to turn back on. Please help!
    Double check that the outlet you are plugging into actually has power. It may be a switched outlet or one that has a GFI that has tripped. (Ask me how I know about this! )
    Make certain that the entire PC is hooked together before you plug into the wall outlet. Then you should hit the power button, firmly but briefly.
    If you're not getting the PC to power up, have the outlet tested and/or take the PC to have the power supply tested. (I had one that would simply power off whenever it wanted to - the power supply was faulty)
    I hope this helps.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Pc entering power saving mode [ 5 Answers ]

The power went out, and now my computer seems to be stuck in power saving mode. HELP please

Power Saving Mode [ 2 Answers ]

Every time I start my computer it enters power saving mode at cuts off. How can I keep this from happening?

Furnace turns off at 'ON' mode and will not operate at 'AUTO' mode [ 6 Answers ]

The furnace will not turns on at "ON' mode. After some reading, I thought it would be the pilot light that has gone out. I re-lighted the pilot light to see blue-red flame, but the furnace will turn off AGAIN after 3-4 hrs. Replaced a new Honeywell non-programmable thermostat today with the...

Problems with Power Saving in Win XP [ 5 Answers ]

So one day I was messing around with power saving options in Windows XP, and was saving different "power saving schemes", and when I clicked the drop down box (of all the schemes) it crashed. So I went back to it, only to find I had no schemes saved any more, and cannot save a new scheme, because...

View more questions Search