Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
30amp GFCI to 50amp GFCI
[ 1 Answers ]
I have a square D panel box with 200 amp service coming into the house. I have a square D 30 amp double pole gfci breaker that was put in last year for a hot tub. I am now getting a new hot tub, and it requires a 50amp gfci breaker. The 30amp currently in place says type/tipo HOM. It is...
When adding a GFCI disconnect for hottub, should I replace GFCI in service panel?
[ 4 Answers ]
I have a hottub now but without a disconnect. Its simply a 6/3-50 amp wire that runs from the hottub to a 50amp GFCI inside the house main service panel. I want to install a disconnect 5-10 feet from the hottub. I bought a disconnect box that already has a GFCI inside of it. Should I have bought...
OK to pigtail from 10ga > 14ga?
[ 1 Answers ]
Hi! I'm putting in a GFCI receptacle in an old house. The wiring is 10ga and I'm having a really hard time working with it -- it doesn't fit well under the screws of the receptacle (Pass & Seymour Trademaster) and it doesn't fit well into the box, even though I calculated the box capacity and it...
220v pigtail how to
[ 1 Answers ]
Hi all, I am attempting to wire an "extension cord" that will convert my welders 220 outlet to fit into a dryer style outlet. I know which wire coming out of the welder is the ground, but don't know which of the two hot leads are which or if it matters, as long as hot goes to hot? Any help. ... View more questions Search
|