Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
92 Honda Civic cylinder firing order?
[ 4 Answers ]
I recently replaced the ignition coil, distributor cap, and rotor on my 92 honda civic. This fixed my initial problem of the car starting; however it seems to be running a little rough and a little gutless. So I am not sure (if when I initially was moving about and replacing things - yes I could...
1998 Honda Civic Misfire Cylinder 2
[ 2 Answers ]
I got a 1998 honda civic that was misfireing in all cylinders. I replaced plugs , plug wires, cap, and rotary button and coil in distributor and I still have a misfire in cylinder 2. Anyone know what the problem is?
91 civic si.. . trouble shooting need civic guru's
[ 1 Answers ]
OK, the name is chad... I own a 91 civic si... it mpfi... I swapped it with a obd1 b16... it runs fine... I converted it to obd1 and I'm having sum issuse's.. (jumper harness,ecu,distributor) I get two codes Code 43 fuel supply system.. . how can I fix all the fuel parts are fine... I...
88 Honda Civic has idling problems
[ 1 Answers ]
I have an 88 Honda Civic and when I start it when it is cold, the engine will race. If I briefly turn off and on the key, it drops down to normal idle, then will again race after a bit. Sometimes it will die at a stop light and I have to turn the key off then on and it will then start. Suspect a...
2000 honda civic trouble shooting
[ 1 Answers ]
My brake light (in dash) won't turn off. My fluid level is good. Any ideas? View more questions Search
|