Ask Experts Questions for FREE Help !
Ask
    RonnyMGA's Avatar
    RonnyMGA Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Oct 17, 2012, 06:45 AM
    Starter problem
    I have just replaced my Hyundai Accent 2004 model's gearbox from auto to manual. The gearbox is funtions well but the main problem is starter. Do I need to replace the starter as well or is there anything to be considered as well. My mechanic suggested starter bending which we replased but still giving a problem. Please help me out.
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Oct 17, 2012, 07:11 AM
    Have you tried installing a reman. Starter for your exact manual transmission? That's what I would do.
    RonnyMGA's Avatar
    RonnyMGA Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Oct 18, 2012, 04:57 AM
    Thanks TxGrease, may you please help me out on the processes to reinstall the reman. I am not sure as my mechanic did change the starter bendings.
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #4

    Oct 18, 2012, 06:22 AM
    . Disconnect the negative battery cable.

    . Buy the proper bolts, if necessary, for mounting the reman. Starter motor. If you are able to reuse the old bolts, clean the threads on a wire wheel. Afterwards, spray the threads with WD-40.

    . Install the starter motor and shims, if any. One bolt frequently needs to be long enough to go into the engine block--this is the grounding bolt.

    . Clean the wire and cable connections with abrasive cloth. Afterwards, apply dielectric grease.

    . Attach the "S" wire to the starter solenoid and the positive battery cable to the starter motor.
    RonnyMGA's Avatar
    RonnyMGA Posts: 3, Reputation: 1
    New Member
    		  
    #5

    Oct 18, 2012, 07:18 AM
    Thanks again, I will go for it.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

John Deere 170 starter problem. [ 1 Answers ]

The 170 has the Kawasaki FC420v, 14hp engine. For a couple years now the starter will click from 1 to several times before it engages. There's seems to be no pattern. Any time, hot or cold, it may engage on the first try or the 50th. Recently, it's been getting worse. I was doing some other...

185 hydro starter problem [ 1 Answers ]

I have a john deere185 hydro , installed a jumper switch for improving and still I have a starting problem. Could it be the starter itself , as I can start it manually with a key on the side. Tks for adv

MTD lawn tractor starter problem [ 2 Answers ]

I've got a MTD lawn tractor 12.5 briggs have the same problem that was posted earlier. I did jump start it and the starter works. I changed the switch and solenoid. The switch will kill the engine. When I turn it to start it will not engage the starter. If I jump across solenoid which is under the...

Starter problem [ 1 Answers ]

I appreciate your help, but.I replaced the starter and it wouldn't do anything but click. I pushed my remote to see if it may be part of the problem, it only clicked, so I put the key in and it started to turn over and stopped. And now back to nothing.the batteries are charged

1998 Honda Accord LX - starter problem [ 3 Answers ]

I have a 1998 Honda Accord LX that will not start - the engine will not turn over. This happened one time about 3 weeks ago and I was going to purchase a new starter (which I did about 3 years ago) but saw some information that it might be a main relay issue, but the car started every time I tried...

View more questions Search