Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Baught a new distributor and still no spark
[ 1 Answers ]
I bought a 94 civic ex that was wrecked, but drivable. We test drove the car went over a bump and the car died. Kept blowing the underhood ecu fuse. After getting it running the o2 sensor was shorting out and burnt the main wire harness from the o2 sensor to the fire wall. Replaced the wire...
92 accord no spark, new distributor still nothing
[ 25 Answers ]
92 accord, no spark. Came into my shop with a bad ignition lock cylinder. Replaced that and it won't start. I replaced the distributor and still nothing. Tried... Distributor, didn't fix it. K test on map sensor, if it's the black box on firewall with 2 connectors on the outside of it,...
1991 Accord, new distributor, plugs, wires, fuel pump, no spark?
[ 4 Answers ]
Hello.. I have a 1991 Honda accord that just got a head gasket re-done. Using a 12V light tester, I have power on the battery side (with a steady light), the other end of the coil wire I hear is supposed to pulse (on the ignition side) but I get no power or light. I've changed the distributor,...
I have a 1994 camry le I replaced the distributor,spark plugs,cap,rotor,fuelpump,igni
[ 5 Answers ]
I have a 1994 camry le . I replaced the distributor,spark plugs,wires,cap,rotor,fuelpump,and ignitor. Still I have no spark to the engine. Sometimes it will crank but when you shut it off for a wile , or over night it will not start. It turns over but will not crank. Help help help!!
Can I put a ICM from a OBD2 distributor into a OBD1 distributor on a honda
[ 1 Answers ]
Can I put a ICM from a OBD2 distributor into a OBD1 distributor on a honda civic View more questions Search
|