|
|
|
|
New Member
|
|
Mar 1, 2009, 07:19 PM
|
|
Error code 31
I have a carrier furnace flashing error code 31 which states:
31-Pressure, draft safeguard, or auxiliary limit (when used) switch did not close or reopened.
How do I fix it?
|
|
|
Ultra Member
|
|
Mar 1, 2009, 07:58 PM
|
|
Turn off power to unit, then back on. Observe unit for the next 5 minutes - what runs, what does the LED do, etc. Post the results.
|
|
|
New Member
|
|
Mar 2, 2009, 03:39 PM
|
|
I turned off power for about 10 minutes or so then turned back on, everything is working like its suppose too. What did this do for it? And is something getting ready to go out on me?
|
|
|
Ultra Member
|
|
Mar 2, 2009, 04:58 PM
|
|
If the unit malfunctions and activates a timed lockout mode, turning power off/on cancels lockout, and the unit will attempt to resume normal operation. Better keep an eye on it, the problem will likely return.
|
|
|
New Member
|
|
Mar 6, 2009, 01:15 PM
|
|
Carrier Furnace model 58RAV, downdraft flashes 3-1. Will re-start by touching a restart switch (draft safeguard tube and switch). Happens too frequently. Is a new switch in order? High wind cap on roof seems OK.
|
|
|
Ultra Member
|
|
Mar 6, 2009, 01:27 PM
|
|
Do you literally mean "touching", or pressing/resetting ("click" felt)? If merely touching the switch tab causes normal function, the internal switch contacts may be oxidized. A replacement would be in order. Frequent resetting potentially indicates a bigger problem.
|
|
|
New Member
|
|
Mar 6, 2009, 06:15 PM
|
|
Originally Posted by KC13
Do you literally mean "touching", or pressing/resetting ("click" felt)? If merely touching the switch tab causes normal function, the internal switch contacts may be oxidized. A replacement would be in order. Frequent resetting potentially indicates a bigger problem.
The re-set switch only moves inward about 1/16 inch at the most with no clicking sound.
|
|
|
Ultra Member
|
|
Mar 7, 2009, 06:03 AM
|
|
Originally Posted by jackburt
The re-set switch only moves inward about 1/16 inch at the most with no clicking sound.
If this action is restoring function, replace the switch.
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
Error code 008
[ 2 Answers ]
Every time I try to send mail I find this message "Oops" error code 008 try in few minutes
Error Code F2
[ 2 Answers ]
I have a Kenmore Elite wahser and it is coming up with an error code F2 not draining proberly seems to be full of soap scum. Any body out there can help please let me know
Error code 39
[ 5 Answers ]
Hi
I have a dell inspiron 6000. Its about 2 years old. Windows xp.
Recently the audio has disappeared. It has a yellow exclamation mark beside it in the control panel and says code error 39- missing or corrupted. I tried a couple of registry cleaners but it made no difference.
I'm afraid to...
Error Code
[ 3 Answers ]
Hi, I have windows me. I installed overdrive media console to my computer. It says you have successfully installed the windows media player security upgrade. To complete the upgrade select the play button below once it is enabled. But I can never click on that button. Instead I get an error...
Code 19 cd/dvd rom error
[ 1 Answers ]
Can anyone help me figure out how to correct my computer's registry? The computer won't recognize the CD/DVD drive at all. It doesn't even show up in 'My computer.' None of my music media are able to play cds because they all say 'a cd drive in needed.' How do you correct the registery? I've...
View more questions
Search
|