Ask Experts Questions for FREE Help !
Ask
    larryviau's Avatar
    larryviau Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 30, 2010, 01:48 PM
    Why does the front end of my 2000 ford focus make noise when braking
    Why is there a loud crunching or grinding noise when braking
    CaptainRich's Avatar
    CaptainRich Posts: 4,492, Reputation: 537
    Cars & Trucks Expert
    		  
    #2

    Nov 1, 2010, 05:45 AM
    Quote Originally Posted by larryviau View Post
    why is there a loud crunching or grinding noise when braking
    Perhaps your brake pads are badly worn?
    Get the brakes inspected and ask for a written estimate.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

2000 Ford Focus [ 2 Answers ]

I was out looking for a new car today and I came across a 2000 ford focus. It has 104,000 miles. I haven't really heard anything about them. I was hoping to find some opinions on them. Positive and Negative comments will help! Thanks! (they are asking $4,700.00)

2002 Ford Focus makes noise when turning while braking [ 3 Answers ]

My 2002 Ford Focus SE has started making noise whenever I turn left or right and brake at the same time. It sounds like it might be coming from the rear of the car but I am not really sure. It has new brakes all around, new rotors on front, new brake cylinders on back, and new wheel bearings on...

Water in Gas tank at least 2 gal in 2000 Ford Focus [ 1 Answers ]

Approximately 2 gallons of water was put in my car. Does someone know how to siphoned gas out of a 2000 Ford Focus. There seems to be something preventing this. I have put one bottle of water remover in the tank. The tank was 1/2 full when the 2 gallons of water were put in. I do not have the...

How do I replace front axle on ford focus? [ 2 Answers ]

Hi , has anyone relaced a front axle on a 2000 ford Focus? I got the axle out of the hub assembly end but how do I pull it out of the trans case? It broke off in an accident so all that's left is the uv joint can or casing going into the trans.

View more questions Search