Search:

GREAT job greasemonkey! I had to get this problem figured out tonight, so I went by my local Chevy dealership and slid under one of their 05 Impala's and sure enough the bolt with the taller head...

Thanks txgreasemonkey for the reply. But the main problem I am having is with the 2 different types of bolts. I don't know which one came out of which hole on the caliper. I have been searching high...

I'm replacing the rear brakes on my 05 Impala, and I have messed up bad. I took of the rotors to have them refaced, but when I went to put them back on, it seems that my caliper pins are 2 different...

It could be the wax ring used to seal the commode. Without doing a smoke test, and if you have ran water in every drain in the bath, I would start there. I'm sure there are post here about the...

Sometimes I have luck with operating the sprayer quickly several times. It sounds as though there is rust or some other debris stuck inside the faucet body.IF that don't work, you may have to...

Here in Kentucky, the code requires either copper, cpvc, or galvanized piping.

If "sleeved into another larger iron pipe with a big flange on it," is indeed the p-trap, take a screwdriver and kind of scrape away at the area where the pipe goes into the " big flange ".
This...

Good news! I finally got the system fixed yesterday. It turned out being the time break delay after all. Again I really appreicate everyone's help! Thanks a ton, Charles

First let me say Thank You to all of my replies so far! I talked to a couple of HVAC guys today and got the same possible problem with the low voltage wire being shorted out. One guy who is a Rheem...

Most of the time the problem is with the diverter inside of the faucet. You can go the www.pricepfister.com and get a parts break down of your faucet and you will be able to see exactly where it is...

What I do is take a small width hacksaw blade, (you can buy a "Mini Hacksaw Blade" and cut 2 notches inside of the broken nipple, or shower arm, one at the top the other at the bottom. Then taking a...

I went back out to check and I don't see any other switches. If I follow the wires, the one from the C terminal goes to the top of the compressor, then another comes out, and goes the relay box. My...

I thought I would add, I can push the contactor down and the a/c unit will then come on. I don't know if this helps any or not.

Hello all,
I have been trying to find out some answers for my cooling problem. I have a Rheem A/C unit that as of yesterday has worked fine. When I switch my theromstat to cool I get the blower...