Ask Experts Questions for FREE Help !
Ask
    Brucesdeli's Avatar
    Brucesdeli Posts: 1, Reputation: 1
    New Member
     
    #1

    May 29, 2009, 05:00 PM
    How to replace oxygen sensors on 2000 lexus rx300?
    Does anyone knows how to locate oxygen sensors?
    I replaced one right under the driver's seat & outside of car but, I am having hard time finding 2nd one!

    Please help,

    Bruce
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #2

    May 29, 2009, 06:36 PM

    There will likely be one located in each exhaust manifold (upstream) and after the catalytic converter (downstream). Depending upon the code(s) being thrown, you should be able to determine which sensors are involved.

    Here's a link that may help:

    https://www.askmehelpdesk.com/cars-t...tml#post223376

    Be sure to go with Denso oxygen sensors--stay away from Bosch.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Repair diagnosis for trouble code P0171 for 2000 Lexus, RX300 [ 15 Answers ]

I just replaced O2 sensor and now check engine light came back on after driving 30 miles. I took to local Aotozone store and they identified as trouble code P0171. Any recommendations for diy repair, what part may be gone bad which sends computer this error code? I am willing to take challenge to...

Troubleshooting Codes 2001 Lexus RX300 [ 1 Answers ]

Airbag warning light keeps blinking. Code B 0138 Short Circuit in Seatbelt Pretensioner for Drivers Side. Cleared code and drove 5 minutes and started blinking again. I need to replace the Drivers Side Pretensioner. Question is this something I can do myself? I do not want to unexpectedly...

All oxygen sensors are bad [ 6 Answers ]

My check engine light is on and I got my catalytic converter replaced and that wasn't the problem. I used a scanner to determine what codes I would get and it's reading Bank 1 and Bank 2. It's not specifying which sensors. I know one of the codes is PO430. Does this mean that all four of my sensors...

Lexus RX300 year 2000 Cup holder [ 1 Answers ]

Hi! I just purchased a 2000 Lexus RX300 and the cupholders for both front and back seats are missing. I have looked at several different auto parts dealers online and no one seems to have that replacement part. Any suggestions as to where and the cheapest way to get those cupholders? Thanks for...

Oxygen Sensors [ 1 Answers ]

This questions is related to oxygen sensors on cars-trucks- Does an oxygen sensor detect lack of oxygen underneath the carriage of a vehicle? Is it possible that an oxygen sensor will cause the engine light to turn on because it is working due to the manifold exhaust being cracked? Thanks


View more questions Search