Ask Experts Questions for FREE Help !
Ask
    dejesus2's Avatar
    dejesus2 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 14, 2010, 02:19 PM
    I have a 93 caravan 3.3l and the abs and brake lights are on and the brake pedal stif
    I have a 1993 dodge caravan 3.3l with 113k and the brake and abs lights are on and the pedal is stiff. I just finished a brake job on it and the lights are still on and pedal is still stiff. How do I fix this problem
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Mar 14, 2010, 02:25 PM

    When you used the disc brake pad spreader, did you open the bleeder screw or remove the cap to the master cylinder reservoir first? Did you replace all of the brake fluid?

    Did you remove each ABS wheel speed sensor mounting bolt (Torx E8) and clean the sensor with a rag and WD-40?

    This link may help:

    https://www.askmehelpdesk.com/cars-t...ml#post1618425

    The pedal could be stiff if the calipers are in bad shape and the piston binds, usually due to not changing the brake fluid every 2 years. Another possibility is a bad master cylinder.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Changed 2000 camry brake light switch, but still will not shift and no brake lights [ 1 Answers ]

My sons 2000 Camry stopped shifting, no brake lights and no cruise control. I changed out the brake light switch, but it still does not work? Any ideas, please. Thanks

1996 dodge ram abs brake light is always on even though the park brake is off [ 3 Answers ]

I have a 1996 dodge ram 1500 and ABS brake light won't shut off even though the park brake isn't engaged could that be the ABS sensor need to be changed ?

Why is my civic brake pedal soft? [ 7 Answers ]

I have a 94 civic si, in the last 2 months, I have replaced both rear wheel cylinders, the master cylinder, and front brake pads. The rotors, shoes and drums are in excellent shape. My problem is that I still have a soft brake pedal even after I bled the system 5 times. I bench bled the master...

NO pedal when trying to brake [ 5 Answers ]

I have a '95 Nissan pickup 2 wheel drive 4 cylinder. About a month ago I started having problems braking (pedal went to floor). I have changed the master cylinder no luck, checked the lines and callipers no leaks, pads are still good front and back. I have about 230,000 miles on the truck and it...

View more questions Search