Ask Experts Questions for FREE Help !
Ask
    Bolaeleruja's Avatar
    Bolaeleruja Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 6, 2007, 10:24 AM
    Automatic transmission gear system
    Why is an automatic transmission system not selecting?
    kitch428's Avatar
    kitch428 Posts: 1,440, Reputation: 152
    Ultra Member
     
    #2

    Jun 7, 2007, 06:47 PM
    Because the selective system in the planetary gearing, coupling with the clutches and bands, torques the converter and the valves in the body just won't select anymore.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

New Craftsman Automatic Transmission Noise? [ 1 Answers ]

I just bought Craftsman Lawn Tractor, Kohler 21HP, Model No. 917.27662, with the Automatic Transmission, (speed lever on the fender) I have a little over an hour use on it. When taking off and especially climbing any hilly terrain, there is a noise that sound like dry, soft rumble coming from the...

Automatic Transmission has had 10-30 motor oil added [ 1 Answers ]

Hello, A 1998 Toyota Camera Trans was topped of with motor oil instead of Dexron. It has been driven some 2000 miles. Dip stick shows NO red color. Car has 160,000 miles. Trans has never been serviced. Should I drain, pump down several times and change filter or just leave it alone. One shop said...

98 Explorer (automatic) won't go in first gear [ 6 Answers ]

Be easy on me, I'm a little mechanically challenged. I recently bought a 98 Explorer 4X4, automatic, and am now having problems with it not wanting to go into first gear. I drove it up to Maryland and thought it might have something to do with the cold weather, but the weather is warming up and I...

Automatic gear problem [ 1 Answers ]

When my Daewoo Nubira gets warm the gearbox changes become very jerky. The problem is worse at medium speed when the gear changes down under acceleration and then changes back up again. Problem only occurs after 30 + minutes of running.


View more questions Search