Ask Experts Questions for FREE Help !
Ask
    rickypayne's Avatar
    rickypayne Posts: 4, Reputation: 1
    New Member
     
    #1

    Sep 30, 2011, 08:01 AM
    95 civic will not start,has power but nothing from the enigine
    I have a 95 civic v-tec and when I came home from work it was fine , I was about to go some where and it would not start, the radio ,lights and everything work I can hear the fuel pump and fans come on. Got a new main relay still does not start.not sure about to check the starter, please let me no anything that might help
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #2

    Sep 30, 2011, 09:19 AM
    If the engine cranks and the CEL comes on and goes off after 2 seconds, when the ignition switch is turned to ON (Position II), then focus on the distributor (e.g. replacing the ICM and coil).
    SERGIO41593's Avatar
    SERGIO41593 Posts: 26, Reputation: 2
    New Member
     
    #3

    Sep 30, 2011, 09:42 AM
    You either have a fuseable linkage problem, or a electronic margel is gone.the fuseable linkage runs to your starter from the ignition switch.it may have burned which will melt the metal fuse in half keeping it from making contact. That is something you can do on your own, Trace the wiring from your ignition to your srarter. It will be a heavy thick layer of tape.if that is not the problem,then you will have to have a diagnostic test. Put it on a computer.
    rickypayne's Avatar
    rickypayne Posts: 4, Reputation: 1
    New Member
     
    #4

    Sep 30, 2011, 11:46 AM
    I took the starter off and checked it it works fine,I think it maybe the icm .going to price it now .
    rickypayne's Avatar
    rickypayne Posts: 4, Reputation: 1
    New Member
     
    #5

    Sep 30, 2011, 11:51 AM
    I also have to say that it was not running full power from the time I bought it I put new wires,plugs,and rotor button on it.the coil and icm are about $100 a piece and can't afford them at the moment.so not sure what to do till I can get those
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #6

    Sep 30, 2011, 04:07 PM
    Be sure to apply silicone heat transfer grease to the back of the new ICM; otherwise, it won't last long.
    rickypayne's Avatar
    rickypayne Posts: 4, Reputation: 1
    New Member
     
    #7

    Oct 1, 2011, 04:37 PM
    Unbelieveable , I was looking around and testing everything and it still did not add up to how it just would not start up it would not turn over or anything. So I got under the dash and started messing around with the clutch pedal and the top little bushing on the pedal it self had falling out so the sensor for the clutch was not engaging... freakin crazy /I could have spent a lot more money and not found the problem

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Honda civic lx troubleshoot power issues with start [ 0 Answers ]

Turn key over and car won't give power to light in dash and won't turn over starter and celinoide is good is it ingnition

Car won't start, no click and no power to radio, power window or locks [ 6 Answers ]

After installing a new starter on a 1999 2WD Explorer it will not start. There is no click when trying to start it, its just dead, and the radio, power locks/windows, a/c, and dash light don't work but the interior lights work and so do the headlights. We've had the starter checked to make sure...

92-92 civic no power to the fuel pump and no power or spark to the distributor [ 9 Answers ]

Hello, I have a 92-95 civic si. I am not getting any power to the fuel pump and no spark to the distributor. I have check all my sensors and have replaced the distributor. Checked the continuity to the distributor and all checks out good. I also have checked all grounds and all checked out all so....


View more questions Search