Ask Experts Questions for FREE Help !
Ask
    ashrack24's Avatar
    ashrack24 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Jul 24, 2006, 08:29 PM
    93 honda civic gauges don't work
    My speedo won't work, whole gauge cluster messed up, please help
    CroCivic91's Avatar
    CroCivic91 Posts: 729, Reputation: 23
    Senior Member
    		  
    #2

    Jul 24, 2006, 10:41 PM
    Check fuses. See if any wires are burned.
    ashrack24's Avatar
    ashrack24 Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Aug 1, 2006, 09:27 AM
    The fuses are all fine, couldn't find any burnt wires. Is there any thing else it could be?
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #4

    Aug 1, 2006, 09:52 AM
    It might be ECM failure, since it doesn't appear to be related to just one sensor. Another possibility is that the whole instrumentation panel needs to be removed and replaced. Probably more than what you want to get involved with. I'd recommend taking it to a Honda dealer.
    aburnett's Avatar
    aburnett Posts: 1, Reputation: 1
    New Member
    		  
    #5

    Sep 27, 2006, 04:40 PM
    I am having the same problem... HELP ANYONE?
    Vandy-1's Avatar
    Vandy-1 Posts: 99, Reputation: 6
    Junior Member
    		  
    #6

    Sep 27, 2006, 07:03 PM
    First off check your vehicle speed sensor, VSS, on the trans.
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #7

    Sep 27, 2006, 07:12 PM
    With ignition ON, check voltage on both test points on under-dash ACG(S) fuse No. 24. If there is no voltage going through the ACG(S) fuse, test/replace the ignition switch and harness going to the under-dash fuse/relay box.
    ashrack24's Avatar
    ashrack24 Posts: 3, Reputation: 1
    New Member
    		  
    #8

    Sep 29, 2006, 07:08 PM
    Thank you for your help , it was the speed sensor, and the gauges themselves. All works now
    honda93's Avatar
    honda93 Posts: 1, Reputation: 1
    New Member
    		  
    #9

    Dec 5, 2010, 08:47 PM
    I'm haven the same problem,when I take my gauge cluster outt and put it in somebody else's honda it works
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

91 honda civic [ 4 Answers ]

I have a 91 honda civic 4 door sedan dx. I just replaced the rotor and distributor cap and now the car won't start. First I checked multiple times to be sure I had the firing order correct. I then read the thread written by CroCivic91 and checked my ECU codes. I got a 10 and 16. The 16 sounds...

91 Honda Civic [ 3 Answers ]

Engine runs rough - a lack of power but not a hard miss - until engine warms up but car must sit for at least 18 hrs. 170,000 miles. Replaced plugs, cap rotor - no help. Distributor shaft has minor oil leak allowing oil to get inside of cap - maybe related.

Honda civic [ 3 Answers ]

My 90 honda civic lx 1.5 twin turbo with intake and cat back exaust won't turn over... it just clicks when I hit the key. I replaced the starter.. still just clicks... checked relays and fuses... im lost please help

Honda Civic 95 [ 5 Answers ]

Hey guys, I have a civic that every time I put the break the dashboard light comes on is that normal?

97 Honda Civic/lights and AC won't work at the same time [ 3 Answers ]

Help! My 1997 Honda Civic is acting up. It was raining yesterday and I had the AC going on defrost. When I turned my lights on, the AC went off. When I turned my lights off, the AC came back on. They won't work together. The battery is a lifetime battery, it starts up just fine, it's just...

View more questions Search