Ask Experts Questions for FREE Help !
Ask
    gilbelar's Avatar
    gilbelar Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 2, 2008, 08:26 PM
    92 heater coil on ford ranger.
    How to change a heater coil on 92 ford ranger.
    CaptainRich's Avatar
    CaptainRich Posts: 4,492, Reputation: 537
    Cars & Trucks Expert
    		  
    #2

    Feb 3, 2008, 08:20 AM
    REMOVAL

    1. Drain cooling system into a suitable container.
    2. Disconnect hoses from heater core. Plug hoses and core openings to prevent leakage of residual coolant.
    3. Working inside the passenger compartment, remove screws attaching heater core access cover and remove the cover.
    4. Pull the heater core rearward and down to remove from the plenum.

    INSTALLATION

    1. Position heater core and seal in the plenum opening.
    2. Install heater core access cover.
    3. Attach heater hoses to core tubes. Use new clamps and do not overtighten clamps.
    4. Refill cooling system and purge all the trapped air.
    5. Check system for proper operation and insure there are no leaks.

    This might be the time to replace all the hoses, if not done recently.

    Name: 1a.gif Views: 13231 Size: 17.4 KB

    I hope this helps.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ford Ranger [ 1 Answers ]

2001 Ranger. I found dangling down from left side rear a hose with a cilp. It was attached to the axle housing. What is it for and where does it go. It just appears to be some type of air hose but is not attached to anything at other end. Should I be concerned? Thanks

1996 Ford Ranger 3.0 liter V6 Heater Core [ 5 Answers ]

Hi I have a 96 Ford Ranger and I'm trying to figure out how to change the heater core in it because it leaks anitfreeze. And I already know that it's behind the glove box but I just can't see how to get the core out of it. I'm getting a little stressed about it. But I won't let it get to me. And I...

2001 Ford Ranger [ 4 Answers ]

I recently purchased a 2001 Ford Ranger XLT. The serpentine belt had a bit of an inconsistent 'squeak' sound. I looked at the belt, and found that it is dry-rotted a little and has cracks. I sprayed a product that is supposed to eliminate the squeaking noise (should that be the true problem),...

92 Ford Ranger 2.3L [ 1 Answers ]

Anyone, what problems does the Check Engine light going on usually indicate? I was coming home tonight, about an hour highway drive and the light momentarily came on, then off, on and off. Not a flicker, but for several minutes at a time. Truck is VERy reliable and there is no indication that...

My ford 2.3 in a 91 ranger [ 3 Answers ]

Hey guys my problem is that I just swaped out a 2.3 for another 2.3 and when it runs it idles fine for a little bit then it seems like starts to miss then boggs out and dies and back fires like a cannon so bad it blew a brand new muffler out of round it kind of seems like it gets a rich smell of...

View more questions Search