Ask Experts Questions for FREE Help !
Ask
    DaZarel's Avatar
    DaZarel Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 30, 2008, 02:55 PM
    84 Bronco Heater Core
    Does anyone know how to install a heater core on an 84 Ford Bronco? It is 8CYL, 2 door automatic. Thanks
    CaptainRich's Avatar
    CaptainRich Posts: 4,492, Reputation: 537
    Cars & Trucks Expert
    		  
    #2

    Mar 30, 2008, 05:53 PM
    Disconnect cable from temperature blend door and the mounting bracket from top of heater assembly.
    Disconnect blower motor and resistor electrical connectors.
    Disconnect and plug hoses from heater core.
    Working under instrument panel, remove 2 nuts on attaching left side of heater assembly and right side of plenum to dash.
    Remove 2 screws attaching right side of heater assembly to dash, then lift heater assembly out of vehicle.
    Remove heater housing plate attaching screws, nut and bolt and the plate.
    Slide heater core and seal out of heater assembly.
    Reverse procedure to install.
    Take appropriate measures to ensure purging air while refilling the cooling system.
    Use clean 50/50 mix of coolant.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heater core problems [ 1 Answers ]

What is the easiest way to remove a heater core from a 2001 dodge ram 1500,quod cab

Ford Taurus heater core noises [ 2 Answers ]

I can hear the water gurgling in heater core inside the car, but the heat comes and goes. It's a new heater core from last winter. This is a 99 Taurus and I had a 92 that did the same thing. How do I get all that gunk out of there to unstop it?

How do you remove the heater core for a Kenmore Elite [ 1 Answers ]

How do one open the Kenmore Elite model 110.64972301?

Heater core [ 1 Answers ]

I have a 2003 Dodge Ram 1500 and the mechanic has discovered that the heater core is clogged. The truck has 25,000 miles on it and the coolant level is in the normal range. The coolant is from the factory. What could have caused the clog?

View more questions Search