Have turned switch to 4W Drive High & turned hubs to lock position but 4W drive will not engage.
Add your answer here.
Check out some similar questions!
2003 Ford 7.3 Power Stroke Turbo- Diesel [ 5 Answers ]
I have a 2003 7.3 power stroke turbo-diesel runs great however after driving the vehicle 5 to 15 minutes starts to bogg down looses all power as if, starving for fuel If let sit for 20 minutes will start up and run for another 15 minutes and stop again.Changed the fuel pump and have a full tank of...
Ford F-250 7.3 Power stroke glow plugs [ 6 Answers ]
:confused: How do I change the glow plugs in my 1999 Ford F-250, 7.3 Power Stoke?
2003 ford F 250 6.0 no fuel pressure [ 0 Answers ]
Got a 20 gal load of what seems to be watered down fuel. Much missing and rough running with a final stop of engine. Sit for a short time and started up and got it home. Replaced both filters and both were old and dirty. Also replace oil and filter plus air filter. Many tries to start failed until...
John Deere L110 drive won't engage after pushing in free wheel rod [ 1 Answers ]
I have a John Deere L110 when I push the free wheel rod in, it does not engage the drive. I can press the forward or reverse pedals and the rear wheels do nothing.
View more questions Search