Ask Experts Questions for FREE Help !
Ask
    Rerun1207's Avatar
    Rerun1207 Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 28, 2011, 08:57 AM
    2006 Chevy Trailblazer.. Low beam headlights don't work. High works and low nothing.
    I do have tail lights and when I hit switch for high the high comes on. Hit switch for low and nothing
    twinkiedooter's Avatar
    twinkiedooter Posts: 12,172, Reputation: 1054
    Uber Member
     
    #2

    Sep 28, 2011, 09:00 AM
    Is this both lights or just one light? If only one works on low, then it's the actual bulb gone bad. Try a new bulb and see if that solves your problem. If it doesn't then there is an electrical problem with the switch or the bulb socket itself.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

2006 Trailblazer Low Beam Headlights Will Not Work But High Beams Do [ 7 Answers ]

2006 Trailblazer Low Beam Headlights Will Not Work, But High Beams Do! Ill check the left and right low beam fuses they were good. Can anyone help me with any solution. Thanks...

Chain pull hunter, no middle speed. Starts high, then low, then low, then off. [ 1 Answers ]

Three speed hunter ceiling fan. 8 years old. Pulling chain was guessing game. Never knew what speed you'd get, Had to keep trying to turn off, never worked like it should. Had a handy man put a new switch in, now it starts in high speed, then low speed, and low speed again, then off. Can't get...

94 integra gsr driver side low beam weak and high bean inop [ 1 Answers ]

It's 94 integra gsr, driver's side low beam weak, has 11volts and high beams dead. Passenger's side bright on both low and high beams with a little over 12 volts. Is there a relay that controls the driver's side headlights?

High Beam/Low Beam on 99 Durango [ 4 Answers ]

My headlights will only work on high beams. My sister owned the Durango before and said she had to mess with the switch from time to time to get low beams to work then finally stopped working. Anyone ran into this problem? I think its in the steering column. I've checked fuses and headlights. ...


View more questions Search