Ask Experts Questions for FREE Help !
Ask
    texscpo's Avatar
    texscpo Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 14, 2008, 03:13 PM
    2004 hyundai sonata will not start
    My wife drove into a carwash and when the water started to spray, the car died. We pushed it out of the car wash and towed it home. It has been at least 8 hours and it still will not start! Any ideas.
    Thanks!
    tribaltat's Avatar
    tribaltat Posts: 1, Reputation: 1
    New Member
    		  
    #2

    Oct 14, 2008, 03:45 PM

    Well most car washes have a thing that will spray under the car it might have gotten the crank and or cam sensor wet. If the car has a check engine light on take it ta advance auto parts,, WE check it for free
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

2004 Hyundai Accent won't start [ 6 Answers ]

My 2004 Hyundai accent was ruinning good, but after parking it, it wouldn't start. The engine was turning over, but there's no spark from the ignition module on. I checked the timing belt and it's OK. What might be wrong?

2004 Hyundai Sonata Won't Start after Alarm goes off [ 2 Answers ]

I have a 2004 Sonata where the key fob is worn so I used the key to enter the car. The alarm went off and I put the key in the ignition. Eventually I had to use my other key fob to shut off the alarm. Now the car won't start. I tried everything including disconnecting the battery for a while...

2001 Hyundai Sonata that won't start [ 4 Answers ]

Hi everyone, What a great site! My question is this. My wife drives a 2001 Hyundai Sonata with about 86,000 miles. I've never had this problem with the car before and of course it is sitting in our garage. She went out to start it this morning. It turns over easily, but will not start or...

2001 4 cylinder hyundai sonata [ 2 Answers ]

Facing the engine from the front bumper what is the order by number of the cylinders and what is the firing order. I am getting a "misfire on cylinder 3" code. Thank you

View more questions Search