Ask Experts Questions for FREE Help !
Ask
    Els's Avatar
    Els Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 3, 2008, 07:55 PM
    My 1995 chevy blazer won't start
    I have an old one, a 1995 chevy blazer. It stopped one day and I have been able to get it start since. We changed fuel fliter, spider injector pump, and fuel pump in the tank. I checked to see if fuel relays are working and they are. The pump in the tank is working, while changing the filter we checked and it is. Still no fuel is getting to the engine. What can I try next? Is there some way of checking the ECM to see if it is allowing fuel in? Help!
    CaptainRich's Avatar
    CaptainRich Posts: 4,492, Reputation: 537
    Cars & Trucks Expert
     
    #2

    Oct 4, 2008, 06:20 AM

    Have you tested for fuel pressure at the pressure test port, labeled here as FUEL PRESSURE CONNECTION?
    Name:  FUEL SUPPLY SYSTEM.gif
Views: 32731
Size:  15.2 KB
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #3

    Oct 4, 2008, 08:12 AM

    Have you checked for spark at each plug? If it's not sparking, focus on the Ignition Control Module and coil.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

1992 chevy s10 blazer [ 2 Answers ]

Where is the fuel pressure regulator on a 1992 s10 blazer, mine is running rough and the smell of fuel is very extreme, si suspect the diaphragm has gone bad and raw gas is leaking into the manifold but don't know where to find it.

1995 chevy cav. Won't start [ 3 Answers ]

I was driving my car and all of a sudden the car stopped and would not restart again almost as if there is no gas. What is the most likely problem

1995 blazer you joints. [ 2 Answers ]

I have a 1995 blazer with bad ujoints.I was going to change them but there are no retaining rings on ends,just metal caps.I can't figure out for the life of me how to get them off.And when or if I do get them off,are there grooves in them for the retaining rings I got with the new ones? Thanks for...

1987 chevy blazer S-10 [ 1 Answers ]

I'm trying to figure out how to remove the steering wheel so I can out in a new ignition switch.

Registration for '99 Chevy Blazer? [ 1 Answers ]

Anyone have an estimate of how much it would cost to register my '99 Blazer? Thank you! :D


View more questions Search