Ask Experts Questions for FREE Help !
Ask
    chris51's Avatar
    chris51 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 18, 2006, 09:40 PM
    1993 accord cluch master cylinder
    How do I change a culch master cylinder on a 93 accord
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Dec 19, 2006, 08:34 AM
    1. Suck brake fluid out of the master cylinder reservoir.
    2. Disconnect the clutch pipe and reservoir hose from the clutch master cylinder.
    3. Pry out the cotter pin; pull the pedal pin out of the yoke. Remove the nuts.
    4. Remove the clutch master cylinder.
    5. Install the clutch master cylinder in the reverse order of removal.
    6. Bleed system.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

1993 HOnda Accord Clutch pedal [ 1 Answers ]

When I depress the pedal on my accord (1993 5 speed manual w 204k miles) the pedal goes to the floor and sticks. I can start the car but cannot get it into gear. The pedal stays depressed and does not return to normal height. There is some fluid in the clutch fluid reservoir. What might be going...

1993 Honda Accord LX [ 3 Answers ]

I need to know where the map sensor is located under dash or under hood ? Thank You Roy

2001 4 cylinder hyundai sonata [ 2 Answers ]

Facing the engine from the front bumper what is the order by number of the cylinders and what is the firing order. I am getting a "misfire on cylinder 3" code. Thank you

1984 Mercury Outboard 4 Cylinder 50HP problem [ 0 Answers ]

Ok,the motor idles good but when you try to get to full throttle the boat is hard to come out of the water and will not plane off like it used to. It seems like it will not hit full rpm's. If anyone can help it would be appreciated.

View more questions Search