Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
I have no spray out of the injectors on 1990 chevy truck 350 throttle body
[ 13 Answers ]
I drove the truck in the garage and removed the engine. I had two bent valves. I removed the engine, had it rebuilt, and put it back in the truck. I tried to start it and no spray from the injectors. I can pour fuel in the throttle body and it runs. I have checked and replace the ignition module,...
1990 Chevy Silverado pickup won't start
[ 2 Answers ]
This problem is intermittent. Sometimes it will start fine. Other times it will the engine will just turn over until you run the battery down. The plugs, plug wires, coil, coil wire, distributer and fuel pump have all been replaced. I can start it and go to the store, turn it off, get back in...
Have a 1990 chevy p/u, m having injector problem, is the ground for injectors fed thr
[ 0 Answers ]
I am having injector problems on 1990 chevy p/u. have fuel to and fire to injectors but fuel does not inject into throttle body, I noticed that the check engine light quit working at same time this problem started. Computer removed and tested working fine. Truck will start and run when manual...
1990 Chevy Pickup Spark Plug Change
[ 7 Answers ]
I have a 1990 Chevy P/U with a 350CI engine. I had one spark plug that is so rusted it will not budge. I have soaked it with WD40. Is there another penetrating oil that would work better? The porcelin top did break but the hex part of the plug is still in tact. I'm concerned about putting too... View more questions Search
|