Ask Experts Questions for FREE Help !
Ask
    BrownChevyTruck's Avatar
    BrownChevyTruck Posts: 1, Reputation: 1
    New Member
     
    #1

    May 2, 2010, 10:44 AM
    1988 chevy truck starts fine, put it in gear and it dies unless you mash the gas
    Chevy 1988 truck 5.0
    My truck will start and run, but once it is warmed up and you put it in drive or reverse it dies, it will not stay running. If you put it in neutral or park it idles fine. If you put it in drive and stomp the gas it will drive, but when you come to a stop sign it will die, unless you put it in neutral.
    We have replaced: rebuilt throttle body with injectors (2), air control value replaced, MAP sensor, TPS sensor.

    Any suggestions?
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #2

    May 2, 2010, 12:04 PM

    Replacing the Ignition Control Module (ICM) should solve the problem. At AutoZone it's part no. DR140, $39.99.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do you replace CV shafts on a 1988 4x4 Chevy truck? [ 0 Answers ]

how do you replace CV shafts on a 1988 4x4 Chevy truck?

95 civic hard start - idles fine - bogs, dies w/gas [ 5 Answers ]

95 Civic LX very difficult to start. Will start after much turning on starter, when it starts, it will idle fine. If the gas pedal is feathered it will rev and hold. If the pedal is blipped it will bog and die. After that it is back to not wanting to start. Can hear the fuel pump run, have fire to...

1988 honda Accord dyes when put into drive and step on gas [ 3 Answers ]

I have a 1988 honda accord 4 door front wheel drive. Here is the problem It starts fine and will run at an idol. However, as soon as you put it in drive the idol slows and wants to die. Sometimes it works and I'm able to drive at times up to a minute or two but then will soon die. During this time...

1989 chevy truck spark&gas won't start [ 2 Answers ]

HI. ALL.I have a 1989 chevy cheynne truck.new wires ,spark plug's,this cap.WORKED Like a timex 1 day,next day won't start.has spark,poured gas in carb.WONT OFFER OR GO PUT ON NEW COIL New ing modgle.wont go.when you turn key,dash has seat belt,and battery,in red that is all.can you advice.thanks.


View more questions Search