Ask Experts Questions for FREE Help !
Ask
    football_man108's Avatar
    football_man108 Posts: 10, Reputation: 1
    New Member
    		  
    #1

    Feb 6, 2008, 09:07 AM
    01 Impala Troubles
    I have a 01 Impala Auto, and we put a brand new trasmisssion in it a little less then 2 years ago, and its starting to shake and mess up when shifting up... I highly doubt it's the transmission, so what else could it be?
    twinkiedooter's Avatar
    twinkiedooter Posts: 12,172, Reputation: 1054
    Uber Member
    		  
    #2

    Feb 6, 2008, 10:26 AM
    It's the transmission. There is nothing that I know of that would exhibit the symptoms of "starting to shake and mess up when shifting up". Apparently that tranny needs attention fast.
    CaptainRich's Avatar
    CaptainRich Posts: 4,492, Reputation: 537
    Cars & Trucks Expert
    		  
    #3

    Feb 6, 2008, 11:38 AM
    Quote Originally Posted by football_man108
    I have a 01 Impala Auto, and we put a brand new trasmisssion in it a lil less then 2 years ago, and its starting to shake and mess up when shifting up.... i highly doubt its the transmission, so what else could it be??
    Is it running poorly? A serious misfire could cause some of these symptoms...
    How many miles? And when were the plugs inspected? Filters etc?
    this8384's Avatar
    this8384 Posts: 4,564, Reputation: 485
    Ultra Member
    		  
    #4

    Feb 7, 2008, 09:10 AM
    How exactly is it "messing up" when shifting? Is it sputtering or making noise? Is your check engine light on? Like Captain said, it could be a misfire problem.

    How many miles have you put on since you installed the replacement transmission? Have you had the filter & fluid serviced since the replacement?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

67 impala upper control arm [ 1 Answers ]

I need an uper control arm for my '67 impala. Does anybody know what vehicles the part can interchange with? Thanks for the help.

1969 chevy impala [ 1 Answers ]

:rolleyes: how do you gauge points set 350 motor

2001 impala abs brakes [ 6 Answers ]

I tried reground front rotors and new rotors and I still have a paulsaing in my brakes... abs light works but it is not on... asumming rotors and pads are good... is it possiable that the abs is on all the time... that causes the paulsaing?can I turn the abs off but unplubing a fuze?. I did...

05 Impala caliper bolt [ 5 Answers ]

I'm replacing the rear brakes on my 05 Impala, and I have messed up bad. I took of the rotors to have them refaced, but when I went to put them back on, it seems that my caliper pins are 2 different types. One is smooth with the threads on the end, the other has a small rubber seal at the end of...

View more questions Search