Ask a mechanical engineer a question?

kivagm Posts: 1, Reputation: 1

New Member

Feb 6, 2012, 02:48 PM

Ask a mechanical engineer a question?

Hello. I need to create a pump-like mechanism that will wave a piece of light silk fabric. The result will be the fabric attached to the wall horizontally and be undulating up and down. This is for a sculpture. Thanks

Check out some similar questions!

Ask a mechanical engineer a question [ 4 Answers ]

I have 2 wheels and on each I have an 18 tooth sprocket run with a 40 chain. Each wheel and sprocket is connected to a main drive shaft with an 18 tooth double sprocket on it. The sprockets on each wheel are linked to the main drive shaft by a single strand ANSI 40 roller chain. One wheel is...

Ask mechanical engineer? [ 0 Answers ]

For my final year project in mechanical engineering I propose to design and build an apparatus consisting of a driven piston/cylinder and incorporate sensors to measure pressure and temperature against crank angle. I don't think I would have any problem with the mechanical side of the project, the...

Insi of mechanical engineer(india) oreng ime is equvelnt to B Tech mechanical [ 0 Answers ]

Insi of mechanical engineer(india) ime is equvelnt to Regular B Tech mechanical engineering? After ime we can take addmision in M Tech in regular? Its very hard to clear all subject?

Ask a mechanical engineer [ 0 Answers ]

I have a hobby of making coin rings by tapping a silver coin around its circumference edge with a small hammer while I turn the coin on top of an anvil to flatten the edge until it reaches a desired width and diameter. Then I cut the center out and polish it. I need advice or an idea to make this...

View more questions Search

Check out some similar questions!

Add your answer here.