Ask Experts Questions for FREE Help !
Ask
    chefg's Avatar
    chefg Posts: 3, Reputation: 1
    New Member
     
    #1

    Oct 28, 2011, 04:46 PM
    My york fan does not turn off long after the burner goes out
    How do I set the fan to turne off when the burner goes out
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
     
    #2

    Oct 29, 2011, 07:05 AM
    There is a fan switch on the heat exchanger that is meant to keep the fan on a while after the burner turns off. That switch is rectangular and has a dial with two sliding switch adjusters. There is a cut-in and cut-out adjustment. You have to be careful when adjusting it or it will not work right. It will always run some after the burner goes off unless you wire in a relay to break the circuit on the wire leaving the fan switch described above. Some of the new units have electronic fan switches that adjust differently. A relay can be wired to any type unit to work by breaking the low speed wire used for heat. The problem is that you will be wasting heat unless there is some sort of time delay wired in. DrTom4444

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My York Furnace Fan doesn't turn on when I want fan only feature otherwise works. [ 1 Answers ]

My furnace runs but the auto pilot does not turn on whatsoever? I changed the batteries in my thermostat. I tried switching from heating back to cooling. Air conditioner works fined. I cut power at circuit breaker to furnace waited for 2 minutes and then turned power back on, but I still can't...

My York furnace Fan doesn't turn on when I want fan only feature otherwise works. [ 7 Answers ]

My York Furnace Fan doesn't turn on when I set the thermostat to fan only otherwise it works during the heating cycle. When someone sets the thermostat to fan only for me while I am in the basement oserving what happened I hear a click and then a red light flashes briefly on the White Rodgers...

My York gas furnace shut off before the blower kicks in. The burner lights up fine. [ 1 Answers ]

My York gas furnace shut off before the blower kicks in. The burner lights up fine. But the burner shut off (about 10 seconds after it lights up) before the blower kicks in. The system keeps trying for three more times. During the daytime the blower kicks in and the everything works fine for the...

York furnace burner won't stay lite [ 1 Answers ]

Hello I have a older york furnace gas converted to propane it been great when turning it on everything works but when the burners light they go out in about 3 to 5 secounds dose it three time then goes to call for no heat code I've put in new flame sencor sill same think can you help thanks jim...

Furnace fan takes to long to turn on [ 1 Answers ]

Have a 1984 mobile home intertherm furnace it takes like 2 minutes for the blower too come on after furnace is heated up already my heat is going rite out the roof vent before turning on.. blower turns on way too late help!!


View more questions Search