Ask Experts Questions for FREE Help !
Ask
    skingsbury's Avatar
    skingsbury Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 29, 2010, 12:42 PM
    The worlds most violent spin cycle...
    Hello.
    My machine moves practically a foot during the spin cycle and sounds like it's going to bring the house down. It's self leveling and is on a level floor. I know NOTHING about appliance repair but am thinking the drum has too much play. Help...

    Scott
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Jan 29, 2010, 07:49 PM

    Does it vibrate even if empty? This is way out of balance.
    mscreations's Avatar
    mscreations Posts: 29, Reputation: 2
    New Member
     
    #3

    Feb 18, 2010, 07:28 PM

    The rear legs of the machine may be self leveling, but the front legs are adjustable. Make sure that the machine is absolutely level.

    As ballengerb1 asked, does it vibrate while empty or only with a load in it?

    Also, is this a top load or front load machine?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Whirlpool washer, agitator works, but during the spin cycle it doesn't spin [ 1 Answers ]

I have a whirlpool washer, I replaced the outer tub and the drive block, but it now doesn't spin. It drains the water, I can hear the motor come on, and feel the vibration . The switch is fine. I looked at the couple, but did not take it apart. The clutch looked fine, sanded the pads and case....

Kenmore washer 70 series humming at spin cycle - won't spin [ 4 Answers ]

RE: kenmore 70 series model 110.20712990 Type 111 top load washer. Won't spin. Humming noise and a little burning/hot smell when supposed to be spinning. Bypassing the lid switch did not correct the problem. Changed out the motor coupling with no luck... still a humming noise but no smell.

Washer machine will not complete entire cycle. It gets to the spin cycle, and stops. [ 1 Answers ]

I have a GE washer, (about 5 years old). The washer goes through the wash and rinse cycles fine. When it gets to the spin cycle, it stops. I can override and manually place the machine on spin. How can I fix this problem so the cycle runs through completely. Thank You

Whirlpool Gold gsq9364hqo doesn't always spin on the spin cycle. [ 2 Answers ]

Whirlpool Gold gsq9364hqo doesn't always spin on the spin cycle. The motor runs but the basket doesn't spin. If I lift the lid the motor stops, then something (clutch or pawl?) catches and if I put the lid back down than it starts spinning correctly every time. Any ideas?


View more questions Search