Ask Experts Questions for FREE Help !
Ask
    bresell's Avatar
    bresell Posts: 1, Reputation: 1
    New Member
     
    #1

    May 12, 2010, 07:42 PM
    Whrlpool gas dryer won't ignite after 1st 15 min. Which therm. To replace?
    Dryer heats initially and for several cycles.(10-15 minutes) Then the burner will not light when the ignitor lights. Is there a specific thermostat that would be a likely culprit? All other motor and functions are normal. I did replace a "sensor" adjacent to the ignitor with no improvement.
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #2

    May 12, 2010, 10:44 PM

    There is some general info on troubleshooting gas driers in the sticky.

    What portion is failing? Ignitor, pilot or main burner?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to replace Coil kit for dryer gas valve (2 coils, new style) [ 4 Answers ]

RE: Whirlpool Gas Dryer How to replace Coil kit for dryer gas valve (2 coils, new style)?

Amana gas dryer PLG8409W2 won't ignite [ 0 Answers ]

I have an Amana gas dryer model #PLG8409W2 that won't dry. When I opened the front to look at the heating mechanism, I noted that the igniter will turn on and produce a nice red-orange glow, but it never ignites. It would appear that the gas flow doesn't turn on. Everything else on the dryer...

Maytag Dryer - gas won't ignite [ 7 Answers ]

I have a 6 year old Maytag dryer, model MDG2300BWW, and the gas will not ignite. The igniter comes on and the valve opens, but there appears to not be enough flow to ignite. If I blow into the chamber when the valve clicks open, I can make it ignite, but it won't do it on it's own. After it...


View more questions Search