Ask Experts Questions for FREE Help !
Ask
    c4chef's Avatar
    c4chef Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 16, 2011, 02:49 PM
    My whirlpool washer won't switch into spin cycle
    The high spin just make a buzz noise.Low spin works but won't switch on its own.

Check out some similar questions!

Whirlpool washer, agitator works, but during the spin cycle it doesn't spin [ 1 Answers ]

I have a whirlpool washer, I replaced the outer tub and the drive block, but it now doesn't spin. It drains the water, I can hear the motor come on, and feel the vibration . The switch is fine. I looked at the couple, but did not take it apart. The clutch looked fine, sanded the pads and case....

Whirlpool washer won't spin in normal cycle [ 1 Answers ]

My Model LA6800xswo washer won't spin in normal but I can manually set it in other spin cycles and it will spin. It doesn't seem to spin all the way in other cycles I have to reset it until clothes are dry enough to move to dryer.

Whirlpool washer gets stuck before spin cycle [ 2 Answers ]

My Whirlpool model LST7233AQO gets stuck before it goes to the spin cycle. It doesn't happen every time, but it's happening more and more. For a while, I was able to get it to continue by depressing the lid switch by sticking a spoon handle in the slot where the lid tab goes in. Now, even that...

Whirlpool Washer Spin Cycle [ 1 Answers ]

Just bought a new whirlpool washer (MD#: WTW5790SQ0), the spin cycle on the washer doesn't work on any cycle EXCEPT normal wash. This was determined by: closing the lid, selecting each individual spin option on the dial and pulling the knob out (starts washer). Both spin cycles work on the Normal...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.