Our whirlpool washer has been slow to fill with cold water. Very little cold water pressure. Tap is full open.
Add your answer here.
Check out some similar questions!
Whirlpool elite washer not filling with water [ 1 Answers ]
I have been filling my washer with a hose from my downstairs sink. When it gets to the rinse cycle I have to fill it AGAIN:mad: I called sears and told them what was wrong but they sent me the wrong part:mad: I was sent the pump that pumps the water out! Please help!:confused:
No water to both sinks / very low cold water pressure to bath and washer [ 1 Answers ]
My kitchen and bathroom sink have no water, period. Hot water seems to be pretty good to the bath and washer but cold water to those 2 locations are very weak. The outside faucet is very weak at best. I have had this problem for quite some time so it's not the fact that they are frozen. I just...
Slow Filling Whirlpool Tub [ 6 Answers ]
I'm in the process of buying a new home. During the home inspection it was noted the whirlpool tub in the master bath fills very slowly. By slowly I mean it took 10 minutes to get the water level above the jets. The water pressure is fine, 60 psi. I'm thinking there may be a flow restrictor...
Cold water pressure in shower and washer only [ 2 Answers ]
Hello, As the subject says, I have a huge loss of cold water pressure in my upstairs shower and my downstairs washing machine only. The upstairs and downstairs sinks are all fine (including the sink directly next to the shower in the upstairs bathroom). Taking the shower head off doesn't make a...
View more questions Search