 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Whirlpool washer don't spin fast enough
I have a whirlpool washer direct drive 2 speed that just don't spin fast enough on high wash cycle, I have tried all the answers in the forum so far which include checking between the tubs for clothing, checking the pump for quality of water being spun out, checking all hoses for kinks and for blockagei have even went so far as checking the house plumbing for blockage, the washer just don't spin fast enough to make the water ring out of the clothes, it don't matter which cycle I put it on either it is always the same speed full or empty. Any ideas, Thanks Wes
|
||||
|
||||
|
Something on the following sites may be of help to you. I hope that it is.
Fixitnow.com Samurai Appliance Repair Man » Blog Archive » Diagnosing transmission problems in a Whirlpool / Kenmore top-loading, direct-drive washer Whirlpool and Kenmore direct drive washer free repair tips http://applianceguru.com/view_topic....&jump_to=13742 Whirlpool Washer Repair, Kenmore Washer Repair / Free Help Photos |
||||
|
||||
|
I had the same problem (I think) with three brand new Kenmore washers (manufactured by Whirlpool). Is your machine located in the basement? If so, there has been a lot of problems with Kenmore/Whirlpool pumps, they can't pump all the water out if pumping up more than a couple of feet, specially on the slower cycles such as permanent press (although the manuals state that they can). After the third model that didn't work, we swore off them and got a Frigidaire.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Had trouble with spin cycle on Whirlpool Ultimate Care Washing Machine. Lid switch was bad so we replaced it. Worked fine for several weeks. Now, washer will spin slowly during spin cycle and empty most of water in tub. Tub will not spin at fast speed & some water is left in the machine. Can you...
I have a Whirlpool washing machine Model LSR8244EQ1 Heave Duty Super Capacity Plus Imperial 8 cycle / 2 speed The washer fills and agitates but when it comes time to spin, it does not spin. I checked to make sure no clothes were wrapped around the agitator but the agitator moves freely. I...
I have a whirlpool washer that will not go into final spin. You have to manual turn the tub clockwise about two turns, Re-set the switch to final spin, close the lib, then it will go into final spin. What is the problem or do I need to replace the switch. Thank YOu;
It goes through the wash cycle and won't spin.then at times it goes through the wash cycle and spins just fine.please help
View more questions Search
|
