Ask Experts Questions for FREE Help !
Ask
    Knmkane's Avatar
    Knmkane Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 29, 2012, 07:56 AM
    Whirlpool top load washer not draining
    It washes just fine. But does not drain. It goes through the motions but only a trickle of water is coming out. Spin also works. Though right now it is taking roughly 2 days to do one small load. Help!

Check out some similar questions!

Whirlpool top load washer [ 0 Answers ]

Washing machine agitates for 2 minutes, then stops

Ge profile top load washer will trip breaker during spin after draining and agitation [ 0 Answers ]

Ge profile top load washing machine will trip breaker every time during spin cycle after it drains and completes agitation. Any ideas as to why? Thank you!

Trying to open top load Whirlpool Washer? [ 2 Answers ]

I am trying to remove the lid switch in a washing machine.. Part # lsr8444lqo & I am trying to pry up the top with putty knife & pry bar & it will not open? Please help me out? Seabee Erik:(

Whirlpool top load washer lsb6300lw1 [ 9 Answers ]

I have a whirlpool top loader that does not like to spin. If I open the lid, hold down the switch while it's on the spin mode, THEN help it start spinning, it will take off. It does not seem to want to begin spinning on it's own. I did replace the clutch, hoping that was the problem. Before...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.