 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Whirlpool Senseon stuck on "Sensing"-does not operate
My dryer is the Whirlpool Senseon Model GEW9868KT1. I have seen a similar condition to mine in your previous answers involving the thermistor unit. My additional symptom is that no matter what setting I put the dryer on when I hit "Start" there is an audible click as the "Sensing" indicator lights up and the dryer does not function. Is this the same issue or is there more to it? Additionally, the outside air temperature is quite cold (9* today and so the drum temperature is low from air entering through the filter area.) Thank you for your help.
Larry Kidwell |
||||
Check out some similar questions!
I Have A 1991 Honda Accord. Over the last month or so, it will put itself Into "sports Drive." The "S" light on the dash goes on, and it switches to this drive, which revs at higher RPMs. It Seems Like This Might Be Some Kind Of Protective Mechanism By The Car. Sometimes I Can Get It Back...
Hey there! I've got a 3" cast iron soil stack, with a 1 1/2" Tee fitting which has a plug in it. There's some goop at the joint, it's pretty hard. Not quite JB-weld hard, but hard. It's beige colored. There's not a lot of room in the space, but I've gotten an 18" pipe wrench on it and i...
My WindowsXP Background will not display in Center or Tile modes. The screen is white. I read that .htm documents are displayed in this way (Stretch only) but don't know what I did so that all images only display in Stretch mode. System Restore is no help.
Our Whirlpool dryer has a cycle for intermittent dry or fluff cycle... it seems that it runs fine, then when it shuts down at the intermittent of fluff cycle it will not turn back on again, any thoughts? Kirk
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
