Ask Experts Questions for FREE Help !
Ask
    Culpepper3309's Avatar
    Culpepper3309 Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 27, 2011, 09:15 PM
    Whirlpool Model LSR8010PQ1Doesn't spin freely
    I have a four year old washer that recently wouldn't ring out the clothes. It just wouldn't spin fast enough to ring out the clothes. I checked the water pump and it seems to pump a lot of water and I didn't find any trash.
    So I purchased and OEM clutch and installed the clutch. It made no difference. When I turned the machine to spin cycle, I heard the motor straining trying to get the basket spinning faster, but something was making it difficult for the motor to achieve high speed, which it did not achieve. I removed the motor and shaft, so all that is left is the cabinet and wash drum. I grabbed the brake cam and I could turn it by hand with the machine laying on its back. The drum is difficult to turn by hand when the machine is in the upright position and without the motor or shaft in it. The washer exhibits sounds like something is binding the motor and not allowing it to run its cycle. I believe the motor is OK.

    I would appreciate any suggestions on where to look next for the issue?

Check out some similar questions!

Whirlpool estate model taws700eq1 washer dripping after spin cycle? [ 0 Answers ]

The washer is leaking after the spin cycle. If the clothes are not unloaded immediately they are get wet again. What are the possible problems?

My whirlpool washer model #LA5668TXW0 does not agitate or spin [ 1 Answers ]

It fills and empties fine

Whirlpool washer Model #LSQ9110KQ1 will not spin or drain [ 0 Answers ]

Whirlpool washer Model #LSQ9110KQ1 will not spin or drain

Whirlpool washer model # LSR8244EQ1 won't spin most of the time [ 1 Answers ]

My whirlpool washer won't spin in spin cycle most of the time. However it will agitate and rinse But most of the time it won't spin (in the spin cycle). I can hear the motor running and sometime it will start to spin at a slow pace. (I did this with any clothes in the washer). How can I test the...

Whirlpool Tub Won't Spin (includes model number) [ 1 Answers ]

I have a Whirlpool Model #LXR7144EQ2. Appears to be a direct drive washer. It drains fine but will not spin when it gets to the cycle. I looked under the machine while it was trying to spin and the clutch assembly was spinning but the tub wasn't. The assembly got pretty hot while this was...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.