Ask Experts Questions for FREE Help !
Ask
    tonygrech's Avatar
    tonygrech Posts: 1, Reputation: 1
    New Member
     
    #1

    Apr 9, 2011, 09:52 AM
    Whirlpool-heavyduty - super cacity - 8 cycle - 2 speed fault does not spin?
    Whirlpool - heavy duty - super capacity 8 cycle 2 speed noes not spin, motor revs when micro switch is kept on and knog on spinning mode.
    JimGu's Avatar
    JimGu Posts: 92, Reputation: 4
    Junior Member
     
    #2

    Apr 11, 2011, 09:26 AM
    You need to read your post and rewrite it so it makes more sense and also include the model number of the appliance. Sounds like it could be a motor coupling, but without the model number to look it up, I can't be sure. What micro switch are you talking about?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Whirlpool washer, agitator works, but during the spin cycle it doesn't spin [ 1 Answers ]

I have a whirlpool washer, I replaced the outer tub and the drive block, but it now doesn't spin. It drains the water, I can hear the motor come on, and feel the vibration . The switch is fine. I looked at the couple, but did not take it apart. The clutch looked fine, sanded the pads and case....

Whirlpool heavy duty super capacity plus will not agitate or spin? [ 0 Answers ]

Whirlpool heavy duty super capacity plus washer will not agitate or spin. I replaced the agitator dogs because they were bad but that was not it. Any Ideas?

Whirlpool LSR9434PQ0 start cycle just hums but spin cycle it works perfectly [ 1 Answers ]

My Whirlpool washer model# LSR9434PQ0 will just hum when you try and start a wash cycle. If you rotate the timer to a spin cycle, it will work fine. I've looked at all of the wire harnesses and connections and there is no sign of a surge burn or a short. Any help would be great. I'm in the...

Whirlpool no spin cycle [ 1 Answers ]

I have a whirlpool top loader direct drive washing machine. It fills and agitates on the wash cycle normally but will not spin or empty the water. Have been manually running the wash rinse cycles and using gravity drain, but am sick of thios. Any thoughts? Teh lid switch is on the right hand side...

Whirlpool Gold gsq9364hqo doesn't always spin on the spin cycle. [ 2 Answers ]

Whirlpool Gold gsq9364hqo doesn't always spin on the spin cycle. The motor runs but the basket doesn't spin. If I lift the lid the motor stops, then something (clutch or pawl?) catches and if I put the lid back down than it starts spinning correctly every time. Any ideas?


View more questions Search