 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Whirlpool front loader that bangs and walks
I have a whirlpool fron tload washer dryer set. The washing machine leaks and moves around on the spin cycle. I ordered and was in the process of installing a new boot when I noticed the bottom counterweight sitting on the bottom on the machine. Further inspection shows that the counterweight has broken from the plastic part that mounts it to the machine and the two side tabs are broken away as well. This is a less than three year old machine model number wfw8300swo3. Is there a fix for this? The plastic mounting piece apperas to be part of the drum.
|
||||
Check out some similar questions!
There is a smell of electrical very little smell , any ideas
Have a model 2400aww maytag front load washer. How do I remove the front panel or what is the best access to the drain pump?
My washer has a horrible moldy damp clothes inside and now even when the clothes come out from being washed they are carring the smell the washer is only 8 months old Help
Model AWM 1821, won't fill with water , have checked water inlets(solenoids) and they are OK, level sensor not to sure but it looks OK. When washer is put through test sequence as per service manual it does fill but won't go into wash sequence, door light willl come on and that's where it stays,...
My basement recently flodded and I think it damaged the front loading washer I have. When I plugged it back in it seems to work, but the washer doesn't spin... it just fills with water and then nothing... no washing, no spinning.. no nothing! How can this be repaired ?:(
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
